Verfasste Forenbeiträge
-
Beiträge
-
Benny,
Thankyou for the reply.
Yes, I am trying to build the 360 degree version with slip-ring.
Cool, I will probably order parts in a few weeks once I get out of school for the summer. I would also be glad to help out with this project how I can too. Sadly, I do not know german, so I do not know if I would be much use.
I suspect this USB plug is what is needed:
http://www.hobbyking.com/hobbyking/store/__61655__Mobius_USB_to_AV_Out_FPV_cable_with_Charging.htmlI will cut the laserframe myself.
By „4mm pitch axis“, do you mean a 4mm rod/axle?
http://www.hobbyking.com/hobbyking/store/__49762__Assault_450_DFC_4mm_Feathering_Shaft_2pcs_.htmlFor the controller, I know that the micro storm32 has all the same features as a the full size version you linked. So, I will use that, and share the files for the top plates I design that have lower profile.
Thanks!
Hello,
Thanks for setting up an english section. I am going to try to get a list of parts for the 3 axis mobius gimbal. Please let me know if that is everything
Controller and IMU: Storm32 Mini
http://www.hobbyking.com/hobbyking/store/__87745__Micro_Storm32_s_BGC_Brushless_Gimbal_Control_Board.htmlYaw motor: RCtimer 2608 70T with slipring
http://rctimer.com/product-1339.htmlPitch/Roll motors: Walker G-3D-Z-05
http://www.dx.com/p/walkera-g-3d-z-05-m-rolling-brushless-motor-wk-ws-22-001b-for-g-3d-gimble-black-brass-357381#.VwiCAPkrJzU
OR
Walkera G-3D-Z-06
http://www.dx.com/p/walkera-g-3d-z-06-m-tilt-brushless-motor-wk-ws-22-001b-for-g-3d-gimble-black-brass-357395#.VwiCsfkrJzU
Which motor is the correct one?And lastly the wood, glue, and some small gauge wires.
Please confirm those are the correct electronics and parts needed for the runcan/mobius 360 degree gimbal.
Thanks.
